The whole rack.

DAV-01 · 2 builds · sound sources

A through-zero analog oscillator with saw, square, triangle and sine outputs and a slow built-in drift for a warmer, less static tone. Hard and soft sync, linear and exponential FM, and a wide range switch for audio or LFO duty. 12 HP, 85 mA +12 V.

TWO-02 · single build · sound sources

Two digital wavetable oscillators with 64 tables each, scannable by hand or by CV. Run them as a detuned pair or as two separate voices. 16 HP, 110 mA +12 V.

PSV-03 · single build · sound sources

A physical-model voice for plucked strings, mallets and bowed tones, with its own envelope and VCA so a single gate makes a note. 10 HP, 70 mA +12 V.

LLF-04 · 2 builds · filters & effects

A four-pole transistor ladder filter with a fat, slightly gritty resonance that self-oscillates at the top. Cutoff CV with attenuverter and a drive knob for extra bite. 8 HP, 40 mA +12 V.

DSV-05 · single build · filters & effects

Two independent 12 dB filters with lowpass, bandpass and highpass outputs, linkable for stereo or for a formant-style vowel sweep. 14 HP, 60 mA +12 V.

SRM-06 · single build · filters & effects

A real spring tank driven from the panel, with dry/wet, drive and a send/return loop for patching effects into the reverb itself. The tank sits behind the case on its own cable. 10 HP, 120 mA +12 V.

TED-07 · single build · filters & effects

A digital delay modelled on tape echo: wobble, saturation and darkening repeats up to two seconds. Tap tempo or clock input, and a freeze button for loops. 12 HP, 95 mA +12 V.

QL-08 · 2 builds · modulation & utilities

Four low-frequency oscillators with their own rate and shape, from slow drifts of several minutes to audio rate. Each has an LED so you can see the movement. 8 HP, 35 mA +12 V.

DAE-09 · single build · modulation & utilities

Two classic attack-decay-sustain-release envelopes on sliders, with a loop switch on each to turn them into extra LFOs. 10 HP, 40 mA +12 V.

ESS-10 · single build · modulation & utilities

Eight steps of pitch and gate on knobs and buttons, with clock in and out, direction modes and a quantiser for in-key melodies. 20 HP, 90 mA +12 V.

QVM-11 · single build · modulation & utilities

Four voltage-controlled amplifiers with linear or exponential response, summed to a mix output. Use it to shape notes, balance voices or attenuate CV. 10 HP, 45 mA +12 V.

BM-12 · single build · modulation & utilities

Two buffered multiples that copy one signal to four outputs without loading it, so a pitch CV stays in tune across several oscillators. 4 HP, 20 mA +12 V.